Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
c. Temperature Setting
Press "
" and "
d. Mode Selection
1) Press "
" to switch among heating "
Heating mode "
": Water setting range(18-40℃)
Cooling mode "
": Water setting range(12~30℃)
Automatic heating/cooling mode "
* When water inlet temperature is higher than setting point, automatic cooling mode starts.
* When water inlet temperature is lower than setting point, automatic heating mode starts.
2）Press "
" to switch among boost mode
Default mode: boost
Please choose boost mode
e. Wi-Fi "
"
When the screen is on, press "
Connect Wi-Fi on mobile phone and input password, and then control equipment by Wi-Fi. When APP
connects Wi-Fi successfully，"
Clear Wi-Fi setting history: When screen is on, press "
seconds, "
" lights off.
f. Defrosting
a. Automatic defrosting: When machine is defrosting, "
b. Forced defrosting: When machine is heating and the compressor is working continuously for 10
minutes, in heating mode, press "
start forced defrosting, "
(Remarks: the interval between forced defrosting should be more than 30 minutes.)
Attention：The controller has power-down memory function.
g. Running status checking
1) Press"
" for 5 seconds, a sound of "di" can be heard and it will enter into running status checking"
" to display and set temperature.
": Water setting range(12~40℃)
for initial heating
"for 3 seconds, after "
" lights on.
" and "
" is flashing and defrost starts, "
", cooling "
" and automatic mode "
, silence mode
" flashing, enter Wi-Fi connection.
" for 10 seconds, after "
" flashing; after defrosting"
" on touch controller simultaneously for 5 seconds to
" stop flashing and defrosting stops.
12
".
" flashing for 10
" stop flashing.
Advertenties
Hoofdstukken
Inhoudsopgave
