Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Stand-by mode
(Child) lock
GB 14
• Touch the + button or - button of the desired cooking zone.
Beside the display of the cooking zone, the fish pan zone element
icon or the 2
nd
zone element icon appears. The extra zone element
is activated immediately. If the + button or - button is not pressed,
the red light to the right of the extra zone element button wil flash
for 3 seconds and then turns off. A single beep is heard.
• Repeat the steps above to activate a 3
extra zone element button again within 3 seconds.
* Only applies if your hob has a 2
Switching off an extra zone element
The extra zone element mode is active. Beside the setting indicator
display of the cooking zone, an extra zone element icon is illuminated.
• Press the extra zone element button.
The light next to the extra zone element button flashes.
• Press the + button and - button of the cooking zone.
• Repeat the above steps until the 1st zone element icon appears.
The extra zone is now switched off.
In stand-by mode, the display for each cooking zone shows '0.'.
• You can switch to stand-by from 'Off' mode, or by switching off the
individual cooking zones (by setting them to '0.').
• In stand-by mode, the hob automatically switches off if no other
buttons are touched within 10 seconds.
Switching the hob from 'Off' to stand-by mode
• Touch the On/Off button.
You will hear a single beep and the display for each cooking zone
will show '0.'.
• You can start cooking in stand-by mode by touching the - button or
the + button for the desired cooking zone.
You can secure the hob with the (child) lock. With this setting, the
hob cannot be switched on and the cooking zone settings cannot be
changed.
The (child) lock button gives you access to the following two functions:
rd
zone element or press the
nd
or 3
rd
zone element.
Advertenties
Hoofdstukken
Inhoudsopgave
