Advertenties
Beschikbare talen
Beschikbare talen
Attachments
Select attachments in accordance with the table below. For slow mixing of ingredients, always start on speed setting 1.
Attachment
Symbol
Flat beater
Whisk
Dough hook
Operation
∙ The appliance must be switched off and unplugged
before attachments are inserted, changed, removed
or cleaned.
∙ Check that the mixing bowl is locked in place before
starting the mixing operation!
∙ After switching off, wait for the motor to stop
running! Do not touch any part of the appliance
whilst still in motion.
Inserting the mixing bowl and filling it with ingredients
∙ Plug the appliance in.
∙ You will hear beeps, and the light ring and LED will flash.
∙ Pull the release lever upwards. The mixer arm
automatically moves upwards. Press with your hands
until you hear a click. The
display shows kg and 0.000.
∙ Place the mixing bowl such that the protrusions on the
bowl fit into the recesses of the appliance.
∙ Press
the button once to tare the scale.
∙ Fill the mixing bowl with the ingredients until the desired
amount is displayed.
∙ Care should be taken to ensure that no dough runs out
of the bowl onto the weighing surface.
∙ Turn the mixing bowl clockwise to lock it in place.
Tip! You can weigh other ingredients during cooking by
switching off the appliance, removing the splash guard
and pulling the release lever upwards to release the
mixer arm. Unlock the mixing bowl, press the
and weigh the ingredients.
Inserting an attachment
∙ Select an attachment.
∙ Insert the attachment into the mixer arm so that the
pin on the mixer arm engages in the recess in the
attachment. Slide the attachment upwards as far as
possible. Turn the attachment anti-clockwise to lock into
place. Check that it is firmly attached.
∙ To lower the mixer arm, pull the release lever upwards
910080 G24M
Use
Light soft mixes, e.g. batters, cakes and puddings
Cream, egg white and mousse
Heavier doughs, e.g. bread dough, pizza dough,
yeast dough
button lights up, and the
button
and press the mixer arm downwards until you hear a
click.
∙ The
button lights up, and the display shows 00:00.
∙ Place the splash guard on the mixing bowl from the left
side.
Operation
∙ Turn the control knob slowly to the required speed
setting.
∙ Always start mixing at speed setting 1 to mix the
ingredients together.
Tip!
Timer
∙ As soon as the appliance is switched on, the display
shows the operational timer setting.
∙ If, before switching the appliance on, the required
mixing time is set using the buttons
second increments, the appliance will stop after this
time has elapsed. You will hear beeps and the light
ring flashes.
∙ To start the appliance again after the time has
elapsed, the control knob must first be set to 0.
∙ You can add other ingredients during the mixing or
kneading operation without weighing them by adding
them through the filling opening in the splash guard.
∙ Ingredients may sometimes stick to the edge of the
mixing bowl and be missed by the movement of the
attachment. If this happens, switch the appliance off and
scrape the ingredients off the edge.
After use
∙ Switch off the appliance and unplug the power cord.
Wait for the motor to stop running.
∙ Remove the splash guard.
∙ Pull the release lever upwards. The mixer arm
automatically moves upwards. Press with your hands
until you hear a click.
∙ Turn the attachment clockwise and take it out.
Recommended speed
1-6
7-8
1-3
in 10
12/23
Advertenties
