Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Press the TRAN button of the receiver, the IR/PWR light flashes indicating the transmitter and
receiver entering adjusting code.
Leaf through the manual to the information regarding "Handheld microphone" and "Bodypack
transmitter" completing adjusting code.
CHECKING THE TRANSMITTER BATTERY POWER
With the receiver and transmitter turned on, after adjust code correctly, short press the Power
button of transmitter and enter normal transmitter mode (BAT lights only). Observe the battery
icon on the display. The number of bars is on the icon. 3 Bars means that the battery is fully
loaded while 1 bar means that the battery is low. If the battery display flashes the battery need to
be renewed.
RACK MOUTING SINGLE RECEIVERS
Position the rack mount brackets over the holes into the sides of the receiver. Secure the
brackets with the supplied screws. Do not overtight the screws. Slide the receiver into the 19"
rack. Secure the brackets to the rack.
Advertenties
Inhoudsopgave
