Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
button is pressed. This helps you counting
the seconds.
LED
Push button
Remove Lisa from the network
• Press and hold the button on the
backside for 3 seconds and release.
• Within 1 second, press and hold the
button for 3 seconds again and release.
• Within 1 second, press and hold the
button for 10 seconds and release.
After you have released the button, the LED
will burn solid red for 5 seconds: Lisa has left
the network.
Button sequence not recognized
When Lisa does not understand the button
pattern, the LED will flash red for 0,5
seconds.
Display
The display shows you the measured
temperature above the line (big), together
with a small thermometer icon. The setpoint
temperature is shown below the line (small).
When changing the setpoint temperature,
the set temperature will temporarily be
shown above the line, and the thermometer
icon will be hidden. Depending on the
situation one or more of the following icons
will be shown.
1
2
3
4
5
6
1.
Battery is almost empty
2.
No connection
3.
Measured temperature
4.
The shown value is the measured
temperature
5.
Set point temperature
6.
Presets: home, night, away, vacation
and frost protection
,
,
Zone thermostat | 19
Advertenties
Inhoudsopgave
