Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. Position Lisa
Wall mount
Do you prefer to place Lisa on the wall? Use
the wall mount.
• Screw the wall mount on the wall.
• Slide Lisa from above on the wall
mount.
18 | Zone thermostat
Controls
Lisa has three buttons on the front to
change the setpoint temperature and the
active preset.
With the left- and right button you can
decrease or increase the setpoint
temperature in steps of 0,5°C.
With the button in the middle on top of the
screen you can switch presets.
Lower
The push button on the backside can be
used for multiple actions. The LED above
the push button shows the feedback.
An overview of the different LED behaviors
is provided at the end of this manual. The
LED will flash red every second while the
Presets
,
,
Higher
Advertenties
Inhoudsopgave
