Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Additional functions
Press to turn ON or turn OFF
Deodorization
the automatic deodorization.
ON/OFF
+
While the it's is ON, deodorization automatically
activates whenever the seat sensor senses the user.
Then it turns off 1 minute after the user leaves the
seat.
Press rear and female
Nozzle
washing together for 3
Cleaning
seconds to eject the nozzle
for manual cleaning of the
nozzle.
+
Press stop to return the nozzle to its original position.
The rear and female washing buttons on the left
side-control can also be used for the same purpose.
Press the stop button on the
Power
remote control for 3 seconds
saving mode
to set V-Care Prime on power
saving mode.
A beeping alarm will signal the start of power saving
mode.To end power saving mode, press and hold the
stop button for 3 seconds again (another beeping
alarm will sound to signal the end of power saving
mode).
The user's skin triggers the
seat sensor. When the seat
Seat sensor
sensor acknowledges
the user, V-Care then goes
into "ready" mode.
None of the function works while the seat is
unoccupied(except for automatic seat & seat cover
for Comfort version).The sensor is located on the 5
o'clock position of the seat.
Press and hold
for 3 seconds
Press and hold
for 3 seconds
Press and hold
for 3 seconds
Seat
Press to turn ON or turn OFF the
Motion
sensor
motion sensor.
ON/OFF
While it's on, the seat cover opens automatically when
it senses the user approach V-Care Prime.
When no movement is detected for 90 seconds, both
seat and seat cover closes automatically.
V-Care Prime is equipped with
Burn
low temperature burn prevention
prevention
to protect children, elderly
and the disabled from burning
themselves without knowing.
When seat temperature remains over 38ºC for more
than 10 minutes, low temperature burn prevention
automatically activates to lower the seat temperature
to below 38ºC.
When power saving mode is
Power
ON
saving mode
temperature will be
automatically set to
when not in use.
Power saving mode turns off automatically when the
user sits on the seat, returning the temperature
setting to the previous user's settings. 10 minutes
after the user leaves the seat, the power saving
mode turns back on to return the temperatures
back to 24ºC
V-Care Prime is equipped with
Freeze
freeze prevention to prevent
prevention
water in the tank from freezing
during cold weather.
Freeze prevention feature does not work
when the power is cut off completely from
power button or power outlet.
When water temperature reaches below 5ºC, the
freeze prevention automatically activates.
40
+
Press and hold
for 3 seconds
,the seat and water
ºC
24
EN
Advertenties
Hoofdstukken
Inhoudsopgave
