Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB/IE/NI
NOTE!
-
The assembly should be carried out by 2 per-
sons (product is approx. 180 cm high).
-
The installation or operation of the product must
be carried out by an adult.
6.1. Structure
Applies to 330487-20-B
1a
(B1)
1. Insert the end of the rod
2a
into the holder pro-
vided in the head of the product 1a.
2. Insert the end of the rod
2a
through the clamping
cross
1c
of the product 1a.
3. Insert the bar
3
into the bar 2a.
4. Insert the foot
4
into the bar
3
.
5. Guide (1) the clamping cross
1c
downwards to
unfold the product
1a
completely.
6. Align the product
1a
so that the arm holes of the
product
1a
are aligned with the arm brackets of
the bar 2a.
7. Insert (2) the rods with arm
5
into the arm hold-
ers of the rod
2a
until they audibly click into
place.
8. Hook (3) the scarf
10
into the opening provided
for it on the neck collar.
9. Cut the rubber cord
6
into 3 pieces of equal
length.
10. Tie one end of the rubber cord
6
to the tension-
ing cross 1c.
11. Attach the other end of the rubber ropes
the 3 hooks
12
on the foot
4
.
Applies to 330487-20-A
1b
(B2):
1. Insert the end of the rod
2b
into the holder pro-
vided in the head of the product 1b.
2. Insert the end of the rod
2b
through the clamping
cross
1c
of the product 1b.
3. Insert the bar
3
into the bar 2b.
4. Insert the foot
4
into the bar
3
.
5. Guide the clamping cross
1c
downwards to un-
fold the product
1b
completely.
6. Cut the rubber cord
6
into 3 pieces of equal
length.
7. Tie one end of the rubber cord
6
to the tension-
ing cross 1c.
8. Attach the other end of the rubber cord
6
3 hooks
12
on the foot
4
.
6.2 Product set up (B1/B2)
Set up the product
1
in an appropriate place.
1. Attach the foot
4
to the ground with 3 ground
hooks
8
.
2. Cut the nylon
7
rope into 3 pieces of equal
8
length.
3. Tie one end of the nylon
7
rope to each eyelet
13.
4. Attach the other end of the rubber ropes
the 3 hooks
12
on the foot
4
.
NOTE!
Danger of property damage
-
The surface should be even and firm so that the
product
1
cannot fall over. The place should
have sufficient free space around the product
-
Place the product
1
in a place protected from
the wind.
-
Make sure that the product
1
and securely! Align it accordingly when tension-
ing with the ground hooks
8
.
-
Make sure that the power cord on the plug
does not run under the foot
4
.
6.3 Use
Insert the plug into the outlet socket (C)
Insert the plug
14
of the product
1
socket
9a
of the mains power adapter
to the polarity.
NOTE!
For this, please pay attention to the recess and po-
6
to
larity
in the outlet socket
9a
of the mains power
adapter
9
.
Screw the union nut
14b
onto the plug 14.
WARNING!
!
Make sure that the union nut
14b
on the plug
firmly seated. This is the only way that weather-proof-
ness in accordance with IP44 can be guaranteed.
The product
1
must not be used without the properly
fitted sealing ring
14a
in the union nut 14b.
The mains power adapter
9
may only be plugged
into the wall socket after checking for completeness.
On/Off switching off the product (D)
to the
To switch on, plug the mains power adapter
the wall socket. The product lights up.
You can activate or deactivate the TIMER FUNC-
TION by pressing the switch
15
on the mains power
adapter
9
.
When the TIMER FUNCTION is activated, the timer
diode
16
lights up green. The product
automatically after 6 hours. After another 18 hours,
the product
1
will automatically switch back on.
As long as the TIMER FUNCTION is on, this daily
rhythm will be repeated.
6
to
To switch off, unplug the mains power adapter
from the wall socket.
7. Cleaning & care instructions
!
Risk of injury!
Before cleaning, you must discon-
1
.
nect the power plug. There is a risk
of electric shock!
-
for heavy soiling use a slightly moistened cloth
stands upright
-
do not use any strong detergents and/or chemicals
-
do not immerse in water
8. Storage
14
1. Clean the product as described under „7. Clean-
ing and care instructions".
into the output
2. The dismantling of the product is done in reverse
9
according
order of point „6.1 Assembly"
3. If available, wrap the product in bubble wrap or
similar.
4. Store the product in a dry, warm place.
9. Conformity declaration
This device complies with the fundamental
requirements and other relevant regula-
tions of the European Electromagnetic
Compatibility Directive 2014/30/EU and the RoHS
Directive 2011/65/EU. The complete original con-
formity declaration is available from the importer.
10. Disposal
14
is
Disposal of the packaging
The packaging and operating instruc-
tions are made of 100 % environmental-
ly friendly materials, which you may dis-
04
pose of at local recycling centres.
LDPE
Disposal of the product
The product may not be disposed of with nor-
9
into
mal household waste. Please find out about
disposal options for the product from your lo-
cal authority or town administration.
11. Warranty
Warranty from TRADIX GmbH & Co. KG
1
switches off
Dear customer, the warranty on this product is 3
years from the purchase date. In the event of defects
in this product, you are entitled to exercise your stat-
utory rights against the seller of the product. These
statutory rights are not limited by our warranty de-
9
scribed in the following.
12. Warranty conditions
The warranty begins on the date of purchase. Please
keep the original receipt. This document is required
WARNING!
as verification of the purchase.
If a material or manufacturing defect arises within
three years from the purchase date of this product,
the product will be repaired or replaced, as per our
choice, at no charge to you. This warranty service re-
quires the submission of the purchase receipt and the
defective product within the three-year period and
a short written description of the defect and when
it arose.
If the defect is covered by our warranty, the repaired
or a new product will be returned to you. The war-
NOTE!
ranty period does not restart with the repair or re-
placement of the product.
Guarantee period and statutory claims for
defects
The guarantee period will not be extended by the
warranty. This also applies to replaced and repaired
parts. Damage and defects which may possibly al-
ready exist upon purchase must be reported imme-
diately after unpacking. After the guarantee period
has expired, required repairs shall be subject to a
charge.
Scope of guarantee
The device has been carefully produced under strict
quality guidelines and conscientiously inspected prior
to delivery. The guarantee service applies to material or
manufacturing faults. This guarantee does not extend to
product parts, which are exposed to normal wear and
tear and can therefore be regarded as wearing parts or
to damage to fragile parts, e.g. switches, battery packs
or which are made of glass.
This guarantee shall lapse, if the product is damages,
not used properly or maintained properly. For proper
use of the product, all of the instructions in the operating
instructions must be precisely complied with. Purpos-
es and actions, which are dissuaded from or warned
about in the operating instructions must be avoided.
The product is only intended for private and not
commercial use. In the case of abusive and improper
handling, use of force and with interventions, which
are not performed by our authorised service branch,
the guarantee shall lapse.
GB/IE/NI
9
Advertenties
Inhoudsopgave
