Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• A damaged cord can cause electric shocks. NEVER use the appliance if it is
damaged, fallen or shows a malfunction, or if the cord or plug are damaged.
Return the appliance in these cases immediately to your sales point.
• Immediately switch off the appliance and pull out the plug after use or when the
appliance is not in use, when cleaning the appliance and when moving it.
• NEVER use separate timers or remote control systems.
• ALWAYS place the appliance on a solid and flat base, such as a kitchen counter or table, so that the
appliance will not move or turn over.
• The appliance may also be used outdoor, on the following conditions:
• The power cord should regularly be examined for signs of damage. If the cord is damaged, do not
use the appliance anymore, but immediately return it to your sales point.
• The appliance must be connected to a socket-outlet having an earthed contact 230V.
• The appliance must be supplied through a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA.
• After use, ALWAYS store the appliance indoors in a dry place.
• In case an extension cord is used:
• Only use an extension cord with a diameter that is minimum equal to the diameter of the
appliances' cord and an integrated earthed plug, and with a higher power than the appliance.
• Take all necessary measures to prevent someone from tripping over the extension cord.
• NEVER let the cord hang over the edge of the table or the counter.
• NEVER place the power supply cord near heat sources such as cookers, heatings or ovens.
• Only use the appliance on the mains voltage as indicated on the identification label.
• This appliance is only suited for indoor household use, and not for professional use.
2.
BEFORE THE FIRST USE
• Remove all packaging and stickers.
• Keep packaging away from children.
• First check your appliance and the power cord for possible damages. If it is damaged, do NOT use the
appliance, but bring it back to your sales point.
• Clean the appliance as described under 'Cleaning' (point 4) before the first use.
• Attach the themostat to the appliance.
• ATTENTION: the thermostat button should always be on the upper side.
• The appliance is now ready for use.
•
Ensure that the voltage marked on the appliance is the same as your main voltage.
3.
OPERATION OF THE APPLIANCE
• Completely unroll the power cord, plug in the thermostat (2) into the appliance and plug in the
appliance in a 230 V socket.
• Then turn the thermostat knob onto the chosen position.
• ATTENTION: the appliance will now get hot. Only touch the thermostat knob and the handles.
• You can now start to bake.
• ATTENTION: do not use sharp objects on the baking plate, this could damage the non stick coating.
TIP: To maintain the non stick coating, we advise to grease the baking plate regularly with baking oil.
12
Advertenties
Inhoudsopgave
