Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Two different seals are fitted on the 13-core cable set for the socket.
Depending on towing hitch design (removable or rigid) the socket insert with 3-way plug
housing (grey) and the socket housing with seal required for the socket retaining plate must be
Removable towing hitch with closed socket retaining plate:
Carefully remove the pre-cut side piece of the socket housing (refer to fig. 1) and fit the socket
with seal for cable side exit onto retaining plate (refer to fig. 2). In this case the seal for socket
with axial cable exit (refer to fig. 3) is not required and must be carefully removed from cable set
without damaging insulation tube.
Rigid towing hitch with open socket retaining plate (fig. 3)
In this case the seal for socket fitted on cable set with side cable exit (refer to fig. 1) is not
required and must be carefully removed from cable set without damaging insulation tube
Position rubber grommet fitted on cable set and insert it into hole leading to boot.
051858a020216
CAUTION:
fitted as follows:
Figure 1
Figure 2
Figure 3
Subject to change
.
7 / 7
Advertenties
Inhoudsopgave
