Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
1.
Red part
2.
Button
3.
Battery cartridge
4.
Switch trigger
5.
Lamp
6.
Reversing switch lever
7.
Bit
8.
Sleeve
SPECIFICATIONS
Capacities
No load speed (min
Impacts per minute
Max. fastening torque
Overall length
Rated voltage
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to impact
driver safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
2. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high
locations.
3. Hold the tool firmly.
4. Wear ear protectors.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
Explanation of general view
9.
Insert bit
10. Spindle
11. Groove
12. Screw
13. Hook
14. Hex bolt
15. Angle head
16. Tooth
Model
Machine screw
Bolt
-1
)
Net weight
BTL060
D.C. 14.4 V
battery charger, (2) battery, and (3) product using
ENE033-1
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
GEB012-2
of overheating, possible burns and even an
explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Always cover the battery terminals with the
battery cover when the battery cartridge is not
used.
6. Do not short the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain. A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
7. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
8. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
9. Be careful not to drop or strike battery.
ENC004-1
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
17. Straight head
18. Ratchet head
19. Standard bolt
20. Fastening torque
21. Proper fastening torque
22. Fastening time (S)
23. High tensile bolt
4 mm - 8 mm
4 mm - 12 mm
0 - 2,000
0 - 3,000
60 N•m
387 mm
1.6 kg
BTL061
1.7 kg
D.C. 18 V
5
Advertenties
Inhoudsopgave
