Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
CUTTING (WITH EDGE GUIDE) (see Fig. 11)
To cut using the edge guide, follow the same basic principles
as noted in Paragraphs 1 through 11 above. Instead of follo-
wing a cutting line, you will simply set the edge guide at the
appropriate width and hold the guide shoe (1) against the
edge of the workpiece (2) to guide the blade in a straight line.
GENERAL
!
WARNING: When servicing, use only identical replace-
ment parts. The use of any other part may create a ha-
zard or cause damage to the product.
DO NOT use solvents when cleaning plastic parts. Plastics
are susceptible to damage from various types of commercial solvents and may be damaged by their
use. Use a clean cloth to remove dirt, dust, oil, grease etc.
!
WARNING: Never allow brake fluids, gasoline, petroleum-based products, penetrating oils, etc. to
come into contact with plastic parts. They contain chemicals that can damage, weaken or destroy
plastic.
DO NOT abuse power tools. Abusive practices can damage the tool and the workpiece.
!
WARNING: DO NOT attempt to modify tools or to create accessories. Any such alteration or modi-
fication is considered to be misuse and could result in a hazardous condition leading to possible se-
rious injury. It will also void the warranty.
LUBRICATION
All of the bearings in this tool are lubricated with a sufficient amount of high-grade lubricant for the life
of the unit under normal conditions. Therefore, no further lubrication is required.
14
|
2
1
Fig. 11
Advertenties
Inhoudsopgave
