Advertenties
Beschikbare talen
Beschikbare talen
Connecting the receiver
In order to avoid distortions or mismatching that may damage the connected audio device, the
product may only be connected to suitable audio inputs.
a suitable adapter.
Switch off the receiver by pressing the POWER switch (1) on
the front panel of the receiver. Make sure that the power LED,
which is just above the POWER switch, is not shining or glowing.
Switch off the audio device (such as mixer, amplifier.... etc.)
to be connected to the receiver and disconnect from the power
supply.
Rotate the volume control rotary knob of receiver to counter
clockwise position and make sure the volume control rotary
knob of the receiver is at the minimum position.
Connect the audio input of the audio device with AUDIO
OUTPUT (7) of the receiver using supplied cable.
MIN
MAX
VOLUME
BALANCE
Installing battery in the microphone
AUDIO OUT
Ole
UNBALANCE
If the audio device has different input socket, use proper
adapter to connect the receiver.
Plug the enclosed antennas into the ANTENNA A and
ANTENNA B (8 and 6) connections of the receiver firmly
by fastening the cap nut and adjust both the antennas in
45° position against each other and towards earth- see
picture.
Plug the low voltage connector of the enclosed mains
adapter into the DC IN connector.
Plug the power adapter into a house-hold wall outlet.
Connect the audio device, which is connected to the receiver,
to power supply.
Ç € Serial No.
ol
Ø lo
CHANNEL SET
ANTENNA - B
Batteries should not reach in the hands of children.
Batteries are hazardous waste and should not dispose with domestic waste!
Observe the right polarity when inserting the batteries.
Remove the batteries if the device is not used for a longer period of time.
Make sure not to short-circuit the batteries or throw them into a fire. They may not be recharged.
Danger of explosion!
|
|
11
Advertenties
