Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. Remove the screw caps a and the blinds b. Unscrew the 9 fixing screws of the handle
and screw the handle on the opposite side of the door. Press the blinds into the remaining
holes in the door and place the covers on the screws.
7. Rotate the bracket 6 together with the washers on the shaft and the plastic gasket at
an angle of 180 °. Unscrew the shaft together with the washers and screw in on the
opposite side of the bracket. After inserting the axis 6 of the bracket into the door of the
refrigerator compartment, screw it on the opposite side of the refrigerator in the lower
holes. Cover c with the bracket and the remaining empty cavity.
8. Insert the cover 4 into the guides on the opposite side of the bottom cover 3. Replace
the bottom cover 3 in its original position.
Operation problems and their solutions. What if ...
The appliance is plugged in to the mains but it does not work and the
•
electricity supply voltage indicator is not illuminated.
electricity supply installations are in order. Check that the plug is correctly inserted into
the electricity supply socket.
The noise has become louder. Check that the appliance is standing stable on a level
•
place. To make it level, regulate the front feet. Check if the appliance is not touching any
furniture and that no part of the refrigeration system at the back part of the appliance
body is touching the wall. Pull the appliance away from any furniture or walls. Check
that the cause of increased noise isn't due to bottles, cans or dishes in the appliance that
might be touching each other.
When the appliance door is opened, the rubber sealing gasket pulls out. The
•
gasket is smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the
groove for it with warm water containing soap or dishwashing detergent and wipe dry.
Put the rubber sealing gasket back into the place.
The temperature rise indicator light is illuminated red. This means the appliance
•
is being connected to the electricity supply for the first time or it was disconnected for a
significant period (for thawing or during an interruption to the electricity supply), the
freezer door is not closed or is being frequently opened and closed, or a large amount of
fresh food has been put in, and therefore the temperature in the compartment has risen
above -9 ºC. When the temperature in the compartment again falls below -9 ºC, the
indicator light will go out.
ATTENTION! If the temperature indicator light does not go out (for reasons other than
those listed above) for longer than six hours, the compressor is either working constantly
or is not functioning. You need to consult service people.
High temperature in appliance, the compressor operation pauses are short.
•
Ascertain whether the appliance door are shutting tightly, whether the door wasn't kept
open longer than necessary when taking out or putting in foodstuffs or whether a large
amount of warm food was placed in the appliance.
The top of the appliance has condensation on it. The ambient relative air
•
humidity is above 70 %.
possible remove the cause of the humidity.
R e m a r k s o n t h e a p p l i a n c e o p e r a t i n g n o i s e .
operates and goes through the freezing cycle, various noises will be emitted. This is
normal and is not a sign of any malfunction.
Ventilate the room where the appliance stands and if
10
Check that your house
As the appliance
Advertenties
Inhoudsopgave
