Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATING INSTRUCTIONS
Safety key
To start the treadmill, the Safety Key must be attached to the Control Pad (yellow circle)
and your clothing. Note, the treadmill will not start unless you do this.
You can STOP the treadmill at any time by pulling the Safety Key off the Control Pad – the
treadmill will STOP immediately.
Starting the treadmill
Turn the power on at the wall and turn the red power switch on at the back of the
treadmill and place the Safety Key on the Control Pad.
Now press the START key - the Control Pad will beep and the LCD display will light up –
the treadmill is now in Standby Mode.
Now select the Manual Mode or a Pre-set Program by referring to the instructions below.
Selecting the PRE-SET programs
There are 12 pre-set programs for you to choose - refer to table below and the Charts on
the Control Pad to determine the degree of diffi culty for each program.
1.
To select a pre-set program, keep pressing the PROG key to switch between
programs.
1.
Now change the TIME by using the Speed + and Speed - keys then press the START
key to start the treadmill and a 3 second countdown will begin(Time range 5-99
minutes).
2021-04-19 OCG BluMill Treadmill + Bluetooth ManualV02.indd 9
2021-04-19 OCG BluMill Treadmill + Bluetooth ManualV02.indd 9
EN
9
07-12-2021 14:46
07-12-2021 14:46
Advertenties
Inhoudsopgave
