Download Inhoudsopgave Inhoud Print deze pagina

Amica EHCX 9A33 510 S Gebruikershandleiding pagina 22

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

OPERATION
 Set the oven function knob and the tem-
perature regulator knob to the switched–
off position.
 Press sensor
MENU
switch off the signal; the signal function
will go out and the display will show the
current time.
Caution!
In ovens equipped with one control knob,
the oven function knob is integrated with the
temperature regulator knob.
Automatic operation
If the oven is to be switched on for a specified
period of time and switched off at a fixed hour
then you should set the operation time and
the operation end time:
 Press sensor
MENU
show:
 Set the required time using the sensors
< and > within a range from 1 minute to
10 hours.
 Press sensor
MENU
show:
 Set the switch–off time (operation end
time) using sensors < and >, which is
limited to a period of 23 hours and 59
minutes from the current time.
 Set the oven function knob and the tem-
perature regulator knob to the setting at
which you want the oven to operate.
The function AUTO is now on; the oven will
start operating from the point when the differ-
ence between the set operation end time and
the operation duration time occurs (e.g. the
operation time is set to 1 hour, the operation
end time is set to 14.00, so the oven will start
working automatically at 13.00).
When the oven reaches the operation end
time it will switch off automatically, the alarm
will be activated and the function AUTO will
start flashing again.
, < and > in order to
until the display will
until the display will
 Set the oven function knob and the tem-
perature regulator knob to the switched–
off position.
 Press sensor
switch off the alarm; the function AUTO
will go out and the display will show the
current time.
Cancel settings
Timer and automatic function settings may
be cancelled at any time.
Cancel automatic function settings:
 press sensors < and > simultaneously,
Cancel timer settings:
 press sensor
tings,
 press sensors < and > again,
Change the timer beeps
The tone of the timer beeps may be
changed as follows:
 press sensors < and > simultaneously,
 select "tone" function with the
sor, the display panel will start to blink:
● with the > sensor press the appropriate
sensors from 1 to 3 to select the option
you wish.
22
, < and > in order to
MENU
to select timer set-
MENU
MENU
sen-

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Ehcx 933 130 s2226c2.334eetsdphbs2226cg2.334eetsdphbs

Inhoudsopgave