Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Set the transmitter with the control button up-
wards next to your computer. The button should
always be within range to start or stop the trans-
mission.
Connect the transmitter to the HDMI output of
your computer and plug the USB connector into
a nearby USB port.
Attention: Be careful not to unnecessarily kink or
pull on the cable. Improper handling can cause
damage.
If your computer or laptop does not have any of
the required outputs or the distances between
USB and HDMI output are too large, extensions
or adapters may be used. In this case, consult a
specialist before using the product to avoid any
damage.
The edge of the control button lights up red immediately after the USB connector has been inserted. The device
initialises and establishes a wireless connection to the base station. If the HDMI connection is connected correctly,
the colour changes to purple or blue (flashing).
b) Computer settings and transmission
If the transmitter unit connected to the computer flashes blue immediately after connection, you can start transmission
at the push of a button.
However, if the coloured ring is still purple, change the display settings in the system settings of your computer or Mac.
In Windows display settings, change the 'Multiple Screens' setting to 'Duplicate these displays' or 'Extend these
displays' to transfer your screen to the HDMI output. In the Align menu item, you can rotate the transferred screen
content for the screen extension. In some cases, TVs or projectors are not set correctly or mounted in a different ori-
entation. Ensure that the resolution recommended for the output device is selected. This is displayed in the Windows
dropdown menu.
If your transmission on the screen is too small, do not change the resolution. Increase the scaling step by step until
the content is clearly visible.
Under Mac: Settings - Monitors you can adjust transmission, layout and rotation similar to the Windows settings.
In the case of different operating systems, the settings described here may have different names or the menu items
may be called up differently.
Screen setting:
Depending on the desired usage, duplicating or extending the screen may be more suitable. For example, in the case
of presentations where you see additional information on your screen, your audience should only see the current
presentation slides without additions. However, if you want to show your exact screen content in order to work with
your audience, extension mode may be better suited.
25
Advertenties
Hoofdstukken
Inhoudsopgave
