Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8. Operation
a) Connection and setup
Place the receiver on a level surface. When selecting the location, pay attention to the distance to other networks and
to transmission systems.
Connect a projector or TV to the receiver via HDMI cable (included in the delivery). Insert the USB cable into the
receiver and the charger and supply it with power.
The supplied chargers may differ depending on the local socket type and power supply. After a short time, a blue LED
lights up on the front of the base station. The device is ready for use.
Attention: If your projector or TV has a free USB port that is suitable for supplying the base station. Check the perma-
nent power output of the port.
Switch the projector or TV on. The welcome screen appears.
Align the base station antennas in roughly the same way. Both antennas should be in the same direction and vertically
aligned. Change the angle and inclination of the antennas in case of poor signal transmission. The antennas should
not be placed directly next to any metal parts.
24
Advertenties
Hoofdstukken
Inhoudsopgave
