Elektrische Aansluitingen - Thermia Atlas Installatiehandleiding
Verberg thumbnails
Zie ook voor Atlas:
- Installatiehandleiding (44 pagina's) ,
- Gebruikershandleiding (36 pagina's)
Inhoudsopgave
Advertenties
Installatiehandleiding
11
Elektrische aansluitingen
11.1
Atlas elektrische aansluitingen 400 V (deze sticker is ook op de elektrakast van de warmtepomp aangebracht)
44
Atlas, Calibra & Calibra Eco
Passive cooling function:
If passive cooling is activated on <BM> in the COOLING menu,
the connections for distribution circuit 1 will be used as follows:
Mark checkbox below if the outputs are used for passive cooling:
Passive cooling
AO24
74
T32
58
R2
38
*
*
The Input / Output signals for extra functionality marked with * can be used for ONE of
the two functions indicated on the label sheet.
After nalizing the electrical installation the function of the I/O is set in the
controller in the "installation" menu by choosing "BM" for the selected function.
If more functionality than included as standard is required, this may be obtained with an
extension module (EM3), available as accessory.
Please mark selected function on the label sheet for future use.
BWCA01IG0410
Shunt valve cooling circuit
Supply line sensor cooling circuit
Circulation pump cooling circuit
Thermia AB
Advertenties
Inhoudsopgave
