Advertenties
Beschikbare talen
Beschikbare talen
2. Installation
2.1 Unpacking and positioning
1. Unpack the appliance carefully. Completely remove the transport-protection. Be
very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
2. The spray arms may be equipped with a transport protection. Remove the
transport protection before installing the appliance.
3. Install the appliance in a dry and well-ventilated place.
4. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
5. Connect the appliance to the mains properly.
6. The nameplate is inside the appliance or at the back.
2.2 Water inlet/drainage installation
1. The water inlet and drainage installation must be carried out by a qualified
professional.
2. Use brand-new hoses and connector kids only.
3. We recommend to secure the water supply with a back pressure valve.
2.3 Installation
1. Before installation
1. You must install the condensation strip on the bottom side of the worktop to
protect it from the water vapor released by the appliance. The condensation strip
deflects the water vapor from the worktop.
2. You will find the condensation strip inside your appliance.
3. Clean the bottom side of the worktop properly before you install the
condensation strip.
4. Remove the protective foil from the adhesive surface of the condensation strip.
5. Stick the condensation strip on the bottom side of the worktop.
6. Improper installation of the condensation strip may cause damage to the
worktop.
Installation of the condensation strip.
(Depending on model)
45
Advertenties
