Advertenties
Beschikbare talen
Beschikbare talen
a: hexagon screwdriver /CR-V 4 mm
6. Installation of the water inlet hose(for cold water
Connect the inlet hose to a connector with a 3/4
inch thread firmly and securely. When the hoses are
new or were not used for an extended period of
time, let the water flow until the hose is clear of any
contamination.
NOTICE! Otherwise the water inlet may be
blocked and the appliance will be damaged.
7. Water outlet hose installation
❖ Connect the cold water connection hose with a 3/4-inch thread connection and
make sure that it is securely tightened on both sides. Once on the cold water
connection and on the device itself.
❖ Make sure not to kink or crush the inlet hose. Do not use a used inlet hose.
❖ The inlet hose must not be shortened or damaged because it contains live parts.
❖ Connect the inlet hose with the hose screw connection to a water tap with an
external thread (3/4 inch).
❖ Check the tightness of the connections on both sides!
50
Advertenties
