OPERATION
Operate the control panel*
- button to select mode of operation
OK
>
- plus button
<
- minus button
- appliance on indicator
- Minute minder
- Duration
- End Time
Set current time
When the appliance is plugged into the elec-
trical mains supply, or when power is restored
after power outage, the digital display will
show flashing 0.00
press and hold
buttons < / >) until you will see
display and the dot below the symbol is
flashing,
press and hold the < / > buttons within 7
seconds to set the current time.
To store the new time setting, wait approxi-
mately 7 seconds after time has been set.
The dot below the
You can adjust the time later. To do this, press
the < / > buttons simultaneously and adjust
the current time while the dot below the
symbol is flashing.
Note:
The oven can be turned on when you see the
symbol on the display.
*optional
OK
(or simultaneously the
OK
on the
symbol will stop flashing.
Minute Minder
You can active the Minute Minder at any time,
regardless of the status of other functions.
The Minute Minder can be set from 1 minute
up to 23 hours and 59 minutes.
To set the Minute Minder:
press the
OK
show flashing
Use the < / > buttons to set the Minute
Minder. The display will show the set time
and Minute Minder symbol . Once the
set time elapses, alarm sounds and the
flashes
Press and hold < / > or
alarm. The will be off and the display will
show the current time after approximately
7 seconds.
Note!
If no button is touched, alarm will turn off
automatically after approximately 7 minutes.
Timed operation
To set the appliance to switch off after a
specific duration:
set the function selector knob and the
temperature selector knob to your pre-
ferred settings,
repeatedly until the display
Press
OK
shows dur (duration) briefly and the
symbol will be flashing,
set the desired duration from 1 minute to
10 hours using the < / > buttons.
The set duration will be memorised after
about 7 seconds. The display will show the
current time and the
Once the duration time has elapsed the
oven will turn off automatically. You will hear
an alarm and the
flashing,
Set the oven function selector knob and
the temperature selector knob in off posi-
tion,
20
button, then the display will
symbol:
to mute the
OK
symbol.
and
symbols will be