Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Once the GPS position has been found,
Once the GPS position has been found, read off the corresponding bracket adjustment and put the bracket in the
right position.
(Note: The mentioned Dish position is just
mentioned Dish position is just an example.)
Additionally the correct position of bracket will be indicated.
Additionally the correct position of bracket will be indicated.
After you have positioned the bracket, press the Start button (1)
positioned the bracket, press the Start button (1)
The system will start the calibration within 5 seconds and search
following messages will be presented
will be presented on the display:
After this startup phase, the system will automatically begin its search for the selected satellite. For example:
After this startup phase, the system will automatically begin its search for the selected satellite. For example:
After this startup phase, the system will automatically begin its search for the selected satellite. For example:
Once the Travel Vision R6 ® has found the satellite, it proceeds with an internal check followed by the
Once the Travel Vision R6 ® has found the satellite,
optimization of its alignment in small increments. This procedure will take about 1-2 minutes. The display will
optimization of its alignment in small increments
show the following message:
DISH IN POS. 1
AND PRESS START
Bracket in position 1 or 2
on within 5 seconds and search its vertical and horizontal reference points.
CALIBRATING
PLEASE WAIT
CALIBRATING
ELEVATION
CALIBRATING
AZIMUTH
ASTRA 1 19.2 °
SEARCH SATELLITE
and put the bracket in the
its vertical and horizontal reference points. The
nal check followed by the
2 minutes. The display will
page 11
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
