Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10. Settings
Press the LIGHT/SNOOZE button (12) at any time to return the home screen.
The weather station will automatically revert to the home screen when no buttons are pressed for
30 seconds.
Hold down the TEMP./+ (4) or BARO./- (2) buttons to move through the digits faster.
a) Basic settings (date, time and units)
You only need to set the time and date manually if (i) the weather station is used outside of
the DCF reception area; (ii) you are not in the Central European time zone (CET); or (iii) DCF
reception is impaired due to the surroundings.
• Press and hold the SET/CH button (1) for 2 seconds until "ON" or "OFF" flashes on the display.
Press the TEMP./+ (4) or BARO./- (2) button to turn the button tones / frost alarm on or off. Confirm
your selection with the SET/CH button (1). The max/min auto-delete setting ("RST") will flash on
the display.
• Press the TEMP./+ (4) or BARO./- (2) button to change the RST setting ("ON" = min/max values
are deleted automatically at 0:00 each day; "OFF" = values are not deleted automatically). Confirm
your selection with the SET/CH button (1). The time zone setting ("ZON") will flash on the display.
• Press the TEMP./+ (4) or BARO./- (2) button to change the time zone. Confirm your selection with
the SET/CH button (1). The time format will flash on the display.
• Press the TEMP./+ (4) or BARO./- (2) button to change the setting. You can choose to display the
time in 12-hour or 24-hour format. Confirm your selection with the SET/CH button. The hour value
will flash and "HR" will be displayed.
• Press the TEMP./+ or BARO./- button to change the hour value. Confirm your selection with the
SET/CH button. The minute value will flash and "MIN" will be displayed.
• Press the TEMP./+ or BARO./- button to change the minute value. Confirm your selection with the
SET/CH button. The date format will flash on the display. You can choose between DD/MM and MM/
DD. Confirm your selection with the SET/CH button. The year will flash on the display and "Y" will
be displayed.
• Press the TEMP./+ or BARO./- button to change the year. Confirm your selection with the SET/CH
button. The month will flash on the display and "M" will be displayed.
• Repeat the above steps to set the month and day. Once you have finished setting the date, the
temperature unit will flash on the display.
• Press the TEMP./+ or BARO./- button to change the unit. You can choose between °Celsius or
°Fahrenheit. Confirm your selection with the SET/CH button. The atmospheric pressure unit will
flash on the display.
37
Advertenties
Hoofdstukken
Inhoudsopgave
