Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6.
Marking
The signal lights comply to the European Directives for EMC and ATEX and implicit to the
Low Voltage Directive. With regard to explosion safety the signal lights have been designed
E
and manufactured on the basis of the essential health and safety requirements of European
Directive 2014/34/EU (ATEX 114) relating to Group II Category 2GD. Harmonized European
construction standards have been applied fulfilling the essential requirements of the
directives. Please refer to chapter 5 'Technical data" and the EU Declaration of Conformity at
the last page of this user manual for more details.
II 2 G Ex mb IIC T4 Gb
II 2 D Ex mb IIIC T135 ºC Db
Cert. DEKRA 23ATEX0068 X
IECEx DEK 23.0048 X
Artidor Explosion Safety B.V., Emopad 38, 5663 PB Geldrop
The Netherlands, +31(0)40 7873911, https://www.artidor.com
Example of an AR-047 signal light label
Warning
To avoid electrostatic charge clean only with a
damp cloth. Do not use solvents.
Permitted supply short-circuit current: 50 A
The AR-047 warning label
7.
Installation instructions
•
Installation of explosion-safe equipment such as this product must be carried out by
personnel specially trained and qualified to do this, following the relevant requirements
of the installation standard EN 60079-14.
•
For the installation and use of this product the relevant safety regulations and also the
generally recognized latest state of the technology apply.
•
During assembly, care must be taken that the framework, screws and surface are strong
enough to take the weight of the signal light.
•
Isolate power from the electrical supply cable prior to installation.
Installation manual AR-047 LED signal light
8 / 36
2813
AR-047/031 Yellow
24 - 48 VDC, 4 Watt
IP65
Year: 2024
-20 °C < Ta < +60 °C
Lot & S/N: AS249999
05-2024
Advertenties
Hoofdstukken
Inhoudsopgave
