Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.
Application
The explosion-safe signal lights series AR-047 have been designed for and are suitable for
use in hazardous classified areas due to flammable gases, vapors, mist, fibers and dust.
Because they are explosion-safe and certified on the basis of Group II Category 2GD of the
European ATEX Directive they are suitable for use in the following types of zones in
explosion hazardous areas:
•
for combustible gases, vapors and mist: zone 1 and 2
•
for combustible fibers and dust: zone 21 and 22
The parts used are all manufactured from corrosion resistant materials and are resistant to
the effects of most common chemicals.
5.
Technical Data
Explosion safety category:
Protection against ignition:
European directives:
Certificates:
Standards applied:
Ambient temperature:
Material housing:
Material lens:
Dimensions:
Mounting:
Light source:
Voltage:
Current:
Ingress protection level:
Mounting position:
Duration of use:
Circumstances of use:
Electrical connection:
Earth connection:
Weight:
Installation manual AR-047 LED signal light
II 2 GD
II 2 G Ex mb IIC T4 Gb, II 2 D Ex mb IIIC T135°C Db
2014/34/EU (ATEX 114) and 2014/30/EU (EMC)
EU-Type Examination Certificate DEKRA 23ATEX0068 X
IECEx Certificate of Conformity IECEx DEK 23.0048 X
EN IEC 60079-0:2018 and EN 60079-18:2015 / A1:2017
-20 ˚C to +60 ˚C
AISI 316 stainless steel or anodized aluminum
20 mm impact-resistant Polycarbonate
Ø 95 x 60 mm (excl. cable gland)
Stainless steel bracket included
15 LEDs
24 – 48 VDC ± 10%
160 mA @ 24 VDC
IP 65 according to EN 60529
As desired (360º)
Continuous
Exterior and interior use
Fixed cable, 4 x 0,75 mm², length 5 m
External, stainless steel, 4 mm²
1.750 g (stainless steel), 930 g (aluminum)
E
05-2024
7 / 36
Advertenties
Hoofdstukken
Inhoudsopgave
