Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The hotplate heats up but the display does
■
not work. Switch off the circuit breaker in
the fuse box. Contact the after-sales
service.
Risk of electric shock!
Incorrect repairs are dangerous. Repairs
■
may only be carried out by one of our
trained after-sales engineers. If the
appliance is faulty, unplug the mains plug
or switch off the fuse in the fuse box.
Contact the after-sales service.
Penetrating moisture may cause an
Risk of electric shock!
■
electric shock. Do not use any high-
pressure cleaners or steam cleaners.
Risk of electric shock!
Causes of damage
Caution!
Rough pot and pan bases scratch the ceramic.
■
Avoid boiling pots dry. This may cause damage.
■
Never place hot pots or pans on the control panel, the
■
display area or the surround. This may cause damage.
Overview
The following table provides an overview of the most frequent
kinds of damage:
Damage
Cause
Stains
Food spills
Unsuitable cleaning agents
Scratches
Salt, sugar and sand
Rough pot and pan bases scratch the
ceramic.
Discolouration
Unsuitable cleaning agents
Pan abrasion (e.g. aluminium)
Blisters
Sugar, food with a high sugar content Remove spills immediately with a glass scraper.
Environmental protection
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly manner.
This appliance is labelled in accordance with European
Directive 2012/19/EU concerning used electrical and
electronic appliances (waste electrical and electronic
equipment - WEEE). The guideline determines the
framework for the return and recycling of used
appliances as applicable throughout the EU.
Energy-saving tips
Always place suitable lids on saucepans. When cooking
■
without a lid, considerably more energy is required. A glass
lid means that you can see inside without having to lift the lid.
Use pots and pans with even bases. Uneven bases increase
■
energy consumption.
The diameter of pot and pan bases should be the same size
■
as the hotplate. In particular, small saucepans on the hotplate
cause energy losses. Please note: cookware manufacturers
A defective appliance may cause electric
■
shock. Never switch on a defective
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in
the fuse box. Contact the after-sales
service.
Cracks or fractures in the glass ceramic
Risk of electric shock!
■
may cause electric shocks. Switch off the
circuit breaker in the fuse box. Contact the
after-sales service.
Risk of injury!
Saucepans may suddenly jump due to
liquid between the pan base and the
hotplate. Always keep the hotplate and
saucepan bases dry.
Damage can occur if hard or pointed objects fall on the hob.
■
Aluminium foil and plastic containers melt on hot hotplates.
■
Oven protective foil is not suitable for your hob.
Action
Remove spills immediately with a glass scraper.
Only use cleaning agents which are suitable for ceramic
Do not use the hob as a work surface or storage space.
Check your cookware.
Only use cleaning agents which are suitable for ceramic
Lift the pots and pans when moving them.
often indicate the upper diameter of the saucepan. This is
usually bigger than the diameter of the base of the pan.
Use a small saucepan for small quantities. A larger, less full
■
saucepan requires a lot of energy.
Cook with only a little water. This will save energy. Vitamins
■
and minerals in vegetables are preserved.
Always cover as large an area of the hotplate as possible
■
with your saucepan.
Switch to a lower heat setting in good time.
■
Select a suitable ongoing cooking setting. You will waste
■
energy by using an ongoing cooking setting which is too
high.
Use the residual heat of the hob. For longer cooking times,
■
you can switch the hotplate off 5-10 minutes before the end
of the cooking time.
23
Advertenties
Hoofdstukken
Inhoudsopgave
