Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
34
www.electrolux.com
Upper basket
11
3.1 Beam-on-Floor
Beam-on-Floor is a light displayed on the
floor below the appliance door.
• When the programme starts, a red
light comes on and stays on for the
duration of the programme.
• When the programme is completed, a
green light comes on.
• When the appliance has a
malfunction, the red light flashes.
4. CONTROL PANEL
1
2
On/Off button / Reset button
1
Delay Start button
2
Indicators
3
MY TIME selection bar
4
4.1 Indicators
Indicator
3
Description
ECO programme indicator. It indicates the most environmentally
friendly programme selection for a normally soiled load. Refer to
"Programme selection".
Rinse aid indicator. It is on when the rinse aid dispenser needs refill‐
ing. Refer to "Before first use".
Salt indicator. It is on when the salt container needs refilling. Refer to
"Before first use".
Machine Care indicator. It is on when the appliance needs internal
cleaning with the Machine Care programme. Refer to "Care and
cleaning".
Drying phase indicator. It is on when you select a programme with the
drying phase. It flashes when the drying phase operates. Refer to
"Programme selection".
Beam-on-Floor is off when
the appliance is deactivated.
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
see if the cycle is finished,
check the control panel.
4
ExtraPower button
5
AUTO Sense button
6
5
6
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
