Becker TimeControl TC445-II Montage- En Gebruiksaanwijzing pagina 43
Verberg thumbnails
Zie ook voor TimeControl TC445-II:
- Gebruikers- en montagehandleiding (116 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SETTING
INTERMEDIATE POSITION, VENTILATION/REVERSE, PROG END LIMIT
(Time/position programming)
INTERMEDIATE
POSITION
1. You have confirmed the HOLIDAY function. INTERMEDIATE POSITION ap-
pears.
2. The switching time for the INTERMEDIATE POSITION can be set using the
+/- buttons. The switching time can be set in a few seconds. Alternatively,
you can move the shutter from the upper end limit into the INTERMEDIATE
POSITION using the UP/DOWN buttons.
3. Press OK to confirm. VENTILATION/REVERSE appears.
4. The switching time for the VENTILATION/REVERSE position can be set using
the +/- buttons. The switching time can be set in a few seconds. Alternatively,
you can move the shutter from the lower end limit into the VENTILATION/
REVERSE position using the UP/DOWN buttons.
5. You have confirmed the VENTILATION/REVERSE menu option. PROG END
LIMIT appears.
6. You can choose between PROG END LIMIT, PROG INTERMEDIATE POSITION
and PROG VENTILATION/REVERSE using the +/- buttons.
Note
This function allows you to select the position into which the curtain/
canopy will be moved at the pre-set switching time.
7. Confirm your selection by pressing OK.
8. The PROG END LIMIT function is now set.
9. For further programme settings in the SETTING menu, see below.
VENTILATION
(REVERSE)
PROG
END LIMIT
PROG
INTERMEDIATE
POSITION
PROG
VENTILATION
de
en
fr
nl
43
Advertenties
Inhoudsopgave
