Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Technical data
Problem
Cause
The paper shredder
The paper is too thin, too
does not start when
soft or too creased to reliably
feeding in paper.
activate the detection sensor.
The paper shredder
The safety switch is activated. Make sure the cutting unit
does not start.
Technical data
Model:
Input voltage:
Power consumption:
Protection class:
Safety class:
Weight:
Dimensions (W × D × H):
Working width:
Cutting method:
Cutting speed:
Bin volume:
Max. cutting capacity per cycle:
Strip dimensions:
Continuous operation time:
Idle time:
Noise level:
Operation temperature:
Automatic start/stop function:
Technical changes reserved.
23
Solution
1. Set the slide switch to REV
position and pull the paper
out of the feed slot.
2. Fold the paper and feed it
again.
is positioned correctly on
the paper/credit card waste
bin until a click sound is
heard.
DR-S4
220–240 V~; 50 Hz
300 W; 1.3 A
II
P-4 (according to DIN 66399)
approx. 5 kg
approx. 353 × 210 × 423 mm
220 mm (A4)
cross cut
approx. 2 m/min. for one 80 g/m² sheet
approx. 1.5 m/min. for ten 80 g/m² sheets
approx.1 m/min. for one credit card
approx. 3.5 m/min. for one CD
20 litres (paper/credit card)
0.5 litres (CD)
10 sheets (80 g/m²), 1 credit card, 1 CD
5 × 16 mm
3 min.
60 min.
approx. 70 dB
10–25 °C
yes
Declaration of conformity
You can request a copy of the EU declaration of conformity from the
address stated on the warranty card.
Disposal
Disposing of the packaging
Sort the packaging before you dispose of it. Dispose of paperboard and
cardboard with the recycled paper service and wrappings with the
appropriate collection service.
Disposing of the old appliances
(Applicable in the European Union and other European countries with separate
collection systems of recyclable materials.)
Old appliances may not be disposed of in the household waste!
Should the paper shredder no longer be capable of being used at some
point in time, dispose of it in accordance with the regulations in force
in your city or county. This ensures that old appliances are recycled in
a professional manner and also rules out negative consequences for the
environment. For this reason, electrical equipment is marked with the
symbol shown here.
Declaration of conformity
24
Advertenties
Hoofdstukken
Inhoudsopgave
