Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
First use
First use
Checking the paper shredder and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed objects, you may easily damage
the paper shredder.
− Be very careful when opening the packaging.
1. Take the paper shredder out of the packaging.
2. Check whether the paper shredder or individual parts exhibit damages.
If this is the case, do not use the paper shredder. Contact the manufacturer
using the e-mail address specified on the warranty card.
3. Check to make sure that the delivery is complete.
Assembling the paper shredder
CAUTION!
Risk of injury!
Handling the paper shredder improperly may result in injury.
− Do not connect the paper shredder to an outlet during
assembly.
− The cutting unit of the paper shredder contains sharp edges.
Be very careful when assembling the paper shredder.
1. Place the paper/credit card waste bin
viewing window
is facing you (see fig. A).
14
2. Subsequently insert the CD waste bin
Slide the CD waste bin onto the guide rails
on the paper/credit card waste bin (see fig. B). Use the
3. Put the cutting unit
1
on both sides to lift the cutting unit. A loud click sound is
carrying handles
3
heard, when the cutting unit is positioned correctly on the paper/credit card
15
11
in front of you. The transparent
15
in the paper/credit card waste bin.
13
inside the waste bin (see fig. A).
waste bin. The sound indicates that the safety switch
for normal operation.
4. The paper shredder is successfully assembled and ready for use.
Shredding
WARNING!
Risk of injury!
Handling the paper shredder improperly may result in injury.
− Hold the paper by both sides when inserting into the feed slot.
Make sure that your fingers do not get too close to the feed slot.
− Only hold the CD by the outer edge when inserting into the
feed slot. Make sure that your finger is not in the CD hole.
This can cause injury when the CD is drawn in.
− Hold the credit card by its narrow side when inserting into the
feed slot. Make sure that your fingers do not get too close to
the feed slot.
1. Make sure that the paper shredder is switched off (slide switch
position) before plugging it into a socket.
2. Connect the power plug with the power cord
3. Set the slide switch to the AUTO position. The READY/ON LED
and the paper shredder switches on.
NOTICE!
Risk of damage!
Improper handling of the paper shredder may result in damage
to the paper shredder.
− Do not operate the paper shredder for longer than 3 minutes
without interruption. Allow it to cool down to room
temperature first before restarting operation.
Shredding
12
has been deactivated
8
at the OFF
2
to a socket.
9
turns green
16
Advertenties
Hoofdstukken
Inhoudsopgave
