7. Once the filter process has been completed, you must turn the coffee strength controller count-clockwise to the drip stop
indication (
). Remove the glass jug from the hot plate and pour the coffee.
Attention: When the water reservoir is empty, there can still be water in the filter. The filtering process is only completed once all
the water has passed the filter.
8. Coffee tastes best immediately after it has been made, so do not wait too long before serving. The glass jug can immediately be
placed back on the hot plate or you can pour the coffee into a thermos jug.
5
controlling the coffee strength
This coffee machine comes with a coffee strength controller. By means of this controller you determine how fast the water flows
through the coffee (extra-fine grind), which affects the strength of the coffee. When making a small amount of coffee, you must
select a low flow speed, so that the coffee has sufficient time to acquire taste. Contrary, in the case of a large amount of coffee, the
flow speed should be higher. Adjust the coffee strength controller in accordance with the volume of water in the water reservoir,
between 1.25L and 0.25L.
Attention: When you turn the coffee strength controller to a lower position than 0.25L, you are activating the drip stop
(
).
Warning: When setting the coffee strength too low in relation to the amount of water, the coffee filter could overflow.
6
pause
If you want to interrupt the coffee making process, in order to pour a few cups for example, you must press the On/Off button to
switch off the coffee machine temporarily. Turn the coffee strength controller to the drip stop (
appliance from continuing to drip. You can resume the coffee making process by pressing the On/Off button once more, after which
the indicator led lights up. The coffee strength controller must be turned to the required strength again. If there is insufficient water in
the water reservoir, no coffee can be made and the indicator led at the On/Off button starts to flash.
Attention: Activating the drip stop (
7
switching off
After use, always switch off the appliance by pressing the On/Off button. The indicator led switches off.
If you do not switch off the appliance after making coffee, the appliance will keep the coffee warm for about 40 minutes. After these
40 minutes the coffee machine switches off automatically. Then remove the plug from the socket.
Attention: After making coffee, do not forget to turn the coffee strength controller to the drip stop (
the appliance from continuing to drip.
Allow the appliance to cool down properly and then remove the paper filter bag, throw it away and clean the filter holder. You must
also remove any residual water in the water reservoir to prevent scaling. This is done as follows: Make sure the appliance is off and has
fully cooled down, remove the plug from the socket, remove the water outlet, filter holder and glass jug from the appliance and then
hold the appliance upside down above the sink. Then place back all components correctly in the appliance.
8
clock and timer function
To have the coffee machine brew coffee automatically at the required time, you must set the clock to the current time.
1. By means of the Hour and Minute buttons you are able to set the current time (24 hour display).
2. Press the Auto or On/Off button to confirm the time. The word CLOCK in the screen stops flashing, the time has been set.
3. Press the Auto button twice in quick succession, the word TIMER starts to flash in the screen.
4. By means of the Hour and Minute buttons you can set the time at which the coffee machine should start making coffee
(24 hour display).
5. Press the Auto button to confirm the time. The word TIMER in the screen stops flashing, the time has been set. After 5 seconds the
current time is shown in the screen again. When you hold down the Auto button, you are able to see the set time for the timer.
6. Press the Auto button once more, the indicator led lights up. The timer function is switched on and the coffee machine will now
make coffee at the time set by you. Once the set time has been reached, the indicator led switches off and the indicator led at the
On/Off button lights up.
14
•
English
) is a manual action and this function must also be switched off manually.
) position to prevent the
) position, to prevent