Inhoudsopgave
Advertenties
It is herewith confirmed that the products listed below
meet the safety requirements within the scope of the conformity evaluation procedure of the
related competent authority, which are defined in the regulation 2004/108/EG of the European
Council for the approximation of laws of the member states with respect to electromagnetic
compatibility. The same applies to the provisions of the law on electromagnetic compatibility of
electrical equipment (EMVG) as of 9 November 1992.
This declaration applies to all units that are manufactured in accordance with the appropriate
manufacturing documentation which is part of this declaration.
For the evaluation of products regarding the electromagnetic compatibility, relevant
harmonized standards have been used.
Immunity:
EN 61000-6-2:2005 including:
EN 61000-4-2:2009; EN61000-4-3:2006 + A1:2008
IEC 61000-4-2:2008
IEC 61000-4-3:2006 + A1:2007
Emission:
EN 55011:2009 (IEC/CISPR 11:2009 modified)
The devices meet the requirements of class A in the standby mode and are designed for
operation in industrial environments. In occurrence of radio interference while using the
devices in residential or commercial areas, the use must be kept as short as possible or the
device must be switched off.
Design-engineering modifications that have such significant effects on both the
technical specifications and the proper use defined in this operation manual so as to
change the instrument significantly shall nullify this declaration of conformity.
This declaration has been signed for manufacturer
ELMED Dr. Ing. Mense GmbH, Heiligenhaus
by
Claudia Mense
Managing director
Heiligenhaus, 14th February 2012
Gebruiksaanwijzing ISOTEST inspect
EC Conformity Declaration
ISOTEST inspect 8.0
ISOTEST inspect 35
Pagina 11
Advertenties
Inhoudsopgave
