Inhoudsopgave
Advertenties
Werking
De volgende bestanden worden op de kaart opgeslagen:
filename
type
trend.csv
data
error.csv
data
history. dat
system
setting.dat
system
logfile.dat
system
TA28xxx.bin Operating
System
RLS Wacon analytics GmbH ∙ +49 (0)5121 28126 0 ∙ info@rls-wacon.de
content
Measured values in tabular form with date, time and measured value
The data is stored in the following format: YYYY.MM.DD [Tab] hh.mm
[Tab] x.xxx [Tab] Unit [LF]
The measured values (x.xxx) are stored in the unit displayed on the
instrument.
Error messages in tabular form with time, date and error
The data is stored in the following format: YYYY.MM.DD [Tab] hh.mm
[Tab] Error code [LF].
Analysis results with time stamp The
device loads them into the internal memory at startup.
Complete instrument setting of the analyzer (optional file)
Before replacing the analyzer, you can transfer the stored instrument
configuration directly to the new instrument. The export can be found
in the menu under Settings > General > Settings. Export. The device
configuration is stored in the menu below: Settings > General >
Settings Import.
Date, time stamp and device start This
file is required for internal purposes.
This file is not on the SD card by default. If there are any software
updates for your analytical instrument, they will be made available to
you by our sales partners or can be downloaded from our homepage.
You can copy this file to the SD card and perform a software update.
For more information about installing a software update, see page83.
We recommend that you delete the file from the SD card after
installing an update.
73
Advertenties
Inhoudsopgave
