Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Clean the air filter
Wash the air filter by immersing it gently in warm water (about 40°C) with a neutral
detergent. Rinse the filter and dry it in a shady place. Install the dry upper air filter after
cleaning, and install the dry lower filter by using the screw (if any).
Storage Preparation
(long idle periods)
1. Clean the air filters
2.
Make sure the unit is completely drained of water and dry. In hum id or damp climates,
operate in Fan only mode until the unit hos dried out.
3. Turn the air conditioner off with the remote and remove the batteries.
4. Disconnect from the power source. Wrap the power cord around the mains cord brackets
and plug the plug into the socket at the back of unit.
5.
Properly dispose the accessories, e.g. exhaust hose, window slider kit, etc.
Re-use after storage
1. Check if anything blocks the air inlet and outlet.
2. Clean the air filters.
3. Check the wires if any damaged or proper grounded.
4.
Re-insta Il the accessoires.
5.
Reconnect to the power source.
6.
Re-insta Il the batteries into the remote controller and turn the unit on.6.1
Aanwijzingen, tips en waarschuwingen
Note:
The air-in side should face down.
EN -45
Advertenties
Inhoudsopgave
