• If necessary, the door hinge can be
switched from right to left.
• Warning! Before carrying out any work
on the appliance, always disconnect the
power plug from the mains.
• To avoid personal injury and material dam-
age, carry out the shift of the door hinge
with two people.
• We recommend that the door stop only be
changed by qualified persons.
• Before you start, it is fundamental that you:
ū Always pay attention to the number of
washers on the trunnion and screws.
ū Always align the doors so that they close
tightly.
a) Unscrew the two screws q which secure
the appliance top w from behind.
b) As you secure the door, remove the lid w
and the upper journal e and put the lid
aside.
c) Raise the door a bit and detach it from the
lower hinge. Place the door in a safe area.
d) Take out the journal holder i from the
bottom right bore of the door.
e) Tilt the device slightly backwards and
unscrew the adjustable front feet r of the
appliance.
f) Unscrew the screws t which hold the
bottom door hinge y.
a) Refer to drawing B when unscrewing the
journal of the lower hinge y from the plate.
b) Turn the plate so that its underside is facing
upwards.
c) Then, replace the journal and secure it with
the nut. The newly configured lower door
hinge receives the number u.
a) Using the screws t, attach the lower door
hinge u to the bottom left side of the appli-
ance.
b) Screw the adjustable front feet r back on
the appliance.
c) Put the entry i for the journal into the drill
hole on the bottom left of the door.
d) Place the upper journal e into the bottom
left bore of the cover w.
e) Put the door onto the journal of the lower
door hinge u and gently press it onto the
appliance.
f) While holding the door, put the lid w in
place with the top journal e sliding into the
door opening.
g) Attach the lid w from behind using both
screws q.
Screw
Appliance top
Upper journal
Adjustable
Step A
foot
Lower bolt
Lower right-
hand hinge
Lower left-
hand hinge
Entry for
journal
Step B
Step C
- 24 -
q
w
e
r
t
y
u
i