Download Inhoudsopgave Inhoud Print deze pagina

Jung FMAS816REG Bedieningshandleiding pagina 15

Verberg thumbnails Zie ook voor FMAS816REG:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

eNet
eNet radiografische schakel-/pulsactor 8-voudig / jaloezieactor 4-vou­
dig, voor DIN-rail
Operating mode
Local Operation
Behaviour on voltage return
Configured venetian blind
position
Configured slat position
Behaviour after the end of the
disabling function
Manual saving of the scene
values
Priority, lock-out protection
Priority, restraint
Priority, wind alarm
Priority, sun protection
82581923
J0082581923
Roller shutter
Venetian blind
Awning
Basic setting: Roller shutter
On, Off
Basic setting: On
No change
Configured value
Basic setting: No change
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
no change
Last value
Down
up
Basic setting: No change
On, Off
Basic setting: On
0...4
Basic setting: 1
0...4
Basic setting: 2
0...4
Basic setting: 3
0...4
Basic setting: 0
15/17
Roller shutter
A rolling shutter or an awning
is controlled for which the
Fabric stretching function is
required.
Venetian blind
A Venetian blind is controlled.
Awning
An awning is controlled for
which the Fabric stretching
function is required.
Blocks the output for operation
using the Prog button.
Defines the behaviour of the
output after voltage return.
RMD design: Bus voltage
return
If the value "Configured positi-
on" is entered for the parame-
ter "Behaviour after voltage
return", then the blind/shutter
position set here is approa-
ched.
If the value "Configured positi-
on" is entered for the parame-
ter "Behaviour after voltage
return", then the slat position
set here is approached.
Behaviour of the output when
a block is removed.
Disables the saving of the cur-
rent Venetian blind position as
scene value in an actuator for
a command via a transmitter.
Specifies the priority for
recalling and removing a sce-
ne of type Lock-out protection
for the channel.
Specifies the priority for
recalling and removing a sce-
ne of type Restraint for the
channel.
Specifies the priority for
recalling and removing a sce-
ne of type Wind alarm for the
channel.
Specifies the priority for
recalling and removing a sce-
ne of type Sun protection for
the channel.
22.07.2016

Advertenties

Inhoudsopgave
loading

Inhoudsopgave