Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
!
Figure j
A
You must ensure the water in the spa matches the water line printed on the spa wall. Never dry-run the power pack as such type of
operation will void the warranty.
B
Control panel
!
FILTER Key - On-off key for the filtration system. Press this key, and the filter pump will start working and the red indicator lamp
will be on. Press again the pump will stop working and the lamp will be off.
When the FILTER PUMP has worked for 168 hours, the letters 'FC' will appear on the display screen, accompanied by a warning tone. At that time,
the indicator lamp for the key of filtration system will be on but the filter pump will actually not work. The indicator lamp for the key of heating
system will be off and the heating system will not work. Only by pressing the key 'FILTER' again can the indicator lamp for the key of filtration
system be off. At that time, the letters 'FC' on the display screen will disappear and so will the warning tone. Actual water temperature will be
displayed. All keys return to normal working status.
'FC' and the warning tone are to remind the user to clean or replace the filter element.
!
Jet Key - On-off key for the jet system. Press this key and the air pump will start working and the red indicator lamp will be on.
Press again and the jet system will stop working and the lamp will be off. The jet system will stop automatically after working for 20 minutes. If
there is still need, you have to wait for 10 minutes and then press the "Jet" key again.
Advertenties
Inhoudsopgave
