Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
1.
Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable in the vicinity of an electrical outlet.
2.
Do not set up the appliance in bathrooms or other wet rooms!
3.
Plug the power plug of the appliance into the electrical outlet (220–240 V
~ 50 Hz). A brief signal tone indicates that the appliance is connected to
the mains supply.
4.
If you want to set up the appliance at a different location, first switch off the
appliance and then unplug the power plug from the electrical outlet.
5.
Do not insert any objects into the appliance.
Adjusting the tilt angle
6.
You can tilt the motor housing horizontally to a certain extent. To do this,
press the motor housing into the desired tilt angle. To prevent appliance
damage, do not use excessive force.
ON/OFF button
7.
Press the ON/OFF button to activate the fan. The appropriate indicator light
on the control panel lights up.
8.
You can now press the button for the misting function, if you want to use the
misting function without fan function. The mist will be distributed without
the fan function.
9.
Press the ON/OFF button again to switch on the fan function. In the basic
settings the appliance runs at low speed in normal mode.
10. Now you can select the other functions.
Setting the speed
11. To switch on the low speed stage, when the device is switched off, press the
ON/OFF button two times in succession. On the control panel the indicator
light for low speed lights up:
12. Now press the „Speed" button until the appliance is working at the desired
speed. The appropriate setting is shown by the respective indicator light:
ƒ Medium speed:
ƒ High speed:
Stand 3.3.2020
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
29 von 64
Advertenties
Inhoudsopgave
