Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
1
Switch on the appliance by using the "ON/OFF Button".
2
Set your desired temperature using the temperature controllers. During the heating process the heating
indicator light will turn on.
3
When the heating indicator deactivates, the unit has reached the set temperature and is ready for use.
4
Before adding the batter, lightly coat the cooking plates with butter or cooking oil (non-stick baking spay
also works well). This will help avoid the tarlets sticking to the cooking plate.
5
Set the timer as desired. When the set time has passed, the timer will ding.
6
Check if the tarlets is cooked properly and remove it using a wooden or plastic utensil.
Use caution when removing the tarlets, as the cookplates is very hot and can cause serious burns. It
is recommended to use protective gloves during handling.
7
Switch off the appliance when not in use.
After it has been switched off, the appliance will remain hot for a while.
8
Clean the appliance after use (see chapter "Cleaning and Maintenance").
9
If the appliance will not be used for a longer period, always switch off and disconnect the power supply.
TROUBLESHOOTING
The following overview will help you understand possible problems. However, only qualified technicians
should attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
The appliance does not work.
The appliance does not
get warm
Temperature cannot
be adjusted.
Possible Cause
The appliance is switched off.
]
The power supply is interrupted.
]
The voltage is not correct.
]
Low temperature settings.
]
Thermostat defective.
]
Heating element defective.
]
Thermostat defective.
]
Possible Solution
Activate the appliance.
f
Check / connect the power supply.
f
Use a compatible power source.
f
Adjust temperature setting.
f
Replace part.
f
Replace part.
f
Replace part.
f
7
Advertenties
Hoofdstukken
Inhoudsopgave
