Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
*Control panel;
A : Digital Screen
B : More heat Button
C : Less heat Button
D : ON/OFF Button
*Operating;
•
Before starting any operation, be sure that inside of the appliance is clean and the wheels of the appliance
are locked.
•
Plug in the appliance.
•
Maximum operating temperature of the appliance is 90°C.If it is more than 90°C,the polyurethane may
damage the body.
•
If the appliance will be used for baked products, it is suggested to use water central heating system. For
this;
o
Add 2,5 litres water to the tank at the bottom of the appliance.
o
Press on/off button.
o
In order to prevent heat lost, keep the lid of the appliance closed as possible as you can.
o
If the water decreases, don't forget to add water.
•
If the appliance will be used for slops, it is suggested to use dry type heating system. For this ;
o
For dry type heating drain the water in the pool through the drainage tap that is under the
appliance.
o
Press on/off button.
o
Inner temperature will be seen after the lights of the indicator is ON.
o
If you press set button of the digital thermostat, the temperature that was set before will be seen
on the screen.
o
Adjust the desired temperature with direction buttons. Press set button again.
o
Inner temperature will be seen on the screen again. It means that the adjusted temperature is
saved to the memory.
o
In order to prevent the heat lost, keep the lid of the appliance closed as possible as you can.
o
You can also fill the hot banquet trolley during the heating operation. In this situation the heating
time will be extend.
•
Unplug the appliance when it is not used and gather the cable on the appliance.
D
OPERATION
6
Advertenties
Inhoudsopgave
Probleemoplossen
