Interposer-Module; Removing The Interposer Module; Installing The Interposer Module - Dell Precision 3240 Compact Servicehandleiding
Verberg thumbnails
Zie ook voor Precision 3240 Compact:
- Onderhoudshandleiding (96 pagina's) ,
- Servicehandleiding (89 pagina's) ,
- Installatiehandleiding (37 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Interposer-module
Removing the interposer module
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
top cover (side bezel)
4. Remove the
front
bezel.
5. Remove the
fan
assembly.
NOTE:
This step is valid for system configuration that is shipped with 80 W CPU.
6. Remove the
riser
card.
About this task
The following images indicate the location of the interposer module and provide a visual representation of the removal procedure.
Steps
1. Flip open the actuator and disconnect the SATA FPC cable from the system board.
2. Loosen and remove the single screw (M3x5) securing the interposer module to the system board.
Installing the interposer module
Prerequisites
Als u een component vervangt, dient u het bestaande component te verwijderen alvorens de installatieprocedure uit te voeren.
About this task
The following image indicates the location of the interposer module and provides a visual representation of the installation procedure.
60
Demonteren en hermonteren
before working inside your
computer.
Advertenties
Inhoudsopgave
