Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Electrical connection
Electrical output: electrical cord + plug with
ground. To be plugged into socket with ground.
Check for compatibility with information on type
plate (behind filter).
Socket must be within reach.
Changes or replacement of the electrical cord
should be performed by a professional only.
1st Possibility
Mounting with chimney, air evacuation to the
ceiling.
The socket is placed behind the chimney.
The plug must be plugged into the sockets
2nd Possibility
Mounting with air evacuation to the back (without
chimney).
The socket is placed above the hood
The plug must be plugged into the sockets
(not really recommended – socket is visible)
3rd Possibility
Mounting with air evacuation to the back (without
chimney)
Electrical supply wire comes through the wall
opening for the air evacuation.
There is a clip mounted on the hood:
• cut the plug from the wire and connect it with
the clip
• connect the electrical supply wire with the
clip also the socket is not visible.
For the 3rd possibility it is necessary to foresee a
complete interruption possibility in the wiring.
The possibility must exist to cut the tension on the
hood for maintenance reasons.
Dimensions: p. 18
Electrical scheme: p. 19
EN 17
Advertenties
Inhoudsopgave
