Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
42
www.electrolux.com
10.3 Cleaning the condenser
If the symbol
display, inspect the condenser and its
compartment. If it is dirty, clean it.
WARNING!
Do not touch the metal
surface with bare hands. Risk
of injury. Wear protective
gloves. Clean carefully to
avoid damaging the metal
surface.
To inspect:
1. Open the door. Pull the filter up.
2. Slide the release button on the bottom
of the door to open the condenser
door.
3. Turn the lever to unlock the condenser
cover.
Condenser flashes on the
4. Lower the condenser cover.
5. If necessary, remove the fluff from the
heat exchanger and its compartment.
You can use a wet cloth and/or a
vacuum cleaner with a brush
attachment.
6. Close the heat exchanger cover.
7. Turn the lever until it clicks into
position.
8. Put the filter back.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
