Connect the mains plug to the mains socket only at the
•
end of the installation process. Make sure that the
mains plug is accessible after installation.
Ensure good air ventilation in the room where the
•
appliance is installed to avoid the backflow of unwanted
gases into the room from appliances burning gas or
other fuels, including open fires.
Exhaust air must not be discharged into a flue which is
•
used for exhausting fumes from any appliances burning
gas or other fuels.
WARNING: Keep ventilation openings clear of
•
obstruction in the appliance enclosure or in the built-in
structure.
The ventilation opening in the base must not be covered
•
by a carpet, mat, or any floor covering.
1.3 Electrical connection
WARNING!
Risk of fire and electric shock.
The appliance must be correctly earthed. The
•
manufacturer is not responsible for the consequences
of an inadequate earthing system.
Make sure that the parameters on the rating plate are
•
compatible with the electrical ratings of the mains power
supply.
WARNING: The appliance must not be supplied through
•
an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and
off by a utility.
Always use a correctly installed shockproof socket.
•
Do not use multi-plug adapters and extension cables.
•
Do not pull the mains cable to disconnect the appliance.
•
Always pull the mains plug.
Do not touch the mains cable or the mains plug with
•
wet hands.
If the mains power supply cable is damaged, it must be
•
replaced by the manufacturer, its Authorised Service
ENGLISH
29