Inhoudsopgave
Advertenties
eNet
Radiografische gateway IP
Stroomverbruik
Omgevingstemperatuur
Beschermingsgraad
Afmeting L×B×H
Aansluiting USB
LAN
Aansluiting
Radiofrequentie
Zendvermogen
Zenderbereik in vrije veld
6.2 Parameterlijst
Settings window
Device settings
Parameters
Manual commissioning
Repeater mode
IP address
Subnet mask
Standard Gateway
DHCP
Settings, channel/scene
Parameters
Local Operation
82589503
J:0082589503
Setting options, Basic set-
ting
On, Off
Basic setting: On
On, Off
Basic setting: Off
Freely-settable IP address
Basic setting: 192.168.0.23
Freely-settable subnet mask
Basic setting: 255.255.255.0
Freely-settable IP address
Basic setting: 192.168.0.1
On, Off
Basic setting: On
Setting options, Basic set-
ting
On, Off
Basic setting: On
6/8
typ. 150 mA
0 ... +45 °C
80×76×25,5 mm
RJ45-bus 8-polig
max. 20 mW
Explanations
Blocks manual commissioning
for all device channels. In the
"Off" setting, the device can-
not be reset to the factory set-
ting.
In addition to its other functi-
ons, the device can be used
as a repeater. In the "On" set-
ting, the device repeats all the
received telegrams.
Setting of the IP address of
the IP Gate.
Setting of the subnet mask.
Setting of the Standard Gate-
way.
Activate the DHCP client.
Automatic allocation of the
network configuration of the
eNet server via a DHCP
(Dynamic Host Configuration
Protocol). When DHCP is acti-
vated, on each switch-on, the
eNet server requests its IP
address from the DHCP ser-
ver, along with the subnet
mask, standard gateway and,
if necessary, DNS address.
Explanations
With this device, the parame-
ter has no function.
IP 20
Micro-bus
868.3 MHz
typ. 100 m
27.03.2014
Advertenties
Inhoudsopgave
