Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.2 Outdoor unit:
1
2
3
4
5
6
1.
Rain gauge
2.
Spirit level, to install the outdoor unit horizontally
3.
Location of the temperature and humidity sensor
4.
Solar panel for charging the super cap (see also paragraph 6.2,
item 'power supply)
5.
UV sensor / light sensor
6.
Wind speed gauge
7.
Wind direction gauge
8.
Brackets for attaching the outdoor unit to a pole (not incl.)
9.
Reset button, use a bend paperclip to press and hold this button
for 4 seconds to reset the outdoor unit
10. Battery compartment for 2 backup batteries (not incl.)
11. LED, flashes every 16 seconds to indicate that measurements are
being transmitted to the indoor unit
7
6. INSTALLATION
6.1
Indoor unit:
General installation and positioning tips:
•
Make sure that the surrounding temperature at the indoor unit is not
affected by lights, radiators, doors or windows, draft, etc.
•
When suspended: make sure the unit is freely suspended, i.e. not
behind a curtain.
•
Make sure that the adaptor wire doesn't create a falling or tripping
risk. Use cable-ties when the wire is too long.
8
Power supply:
9
The main power of the indoor unit is provided through the supplied
10
power adaptor. Insert the low-voltage plug of the adaptor into the
11
DC5.0V input at the rear of the indoor unit and then connect the adaptor
with a 230V wall socket.
43
Advertenties
Hoofdstukken
Inhoudsopgave
