Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
(3). Installation
Installing the cooker hood
1. Position the hood against the wall and mark the position of the support holes (A, B, C, D and
E) that are to be drilled as shown.
2. Use a drill bit with an 8 mm diameter to make holes in the wall where you have marked these positions.
3. Insert the supplied five wall plugs in the holes and fix the hanging plate on the holes A, B and C with the supplied 4
x 40 mm screw.
4. Hang the hood on the two hooks (F and G) and fix it onto the wall by tightening the supplied 4 x 30 mm screws into
the wall plugs in D and E.
Installing the pipe
1. Place the pipe A on the top of the hood.
2. Fix the pipe A onto the hood using the supplied screws.
3. Place the pipe B over pipe A.
4. Position the pipes A and B against wall and mark the position of the support holes (H, I, J and K).
5. Use a drill bit with an 8 mm diameter to make four holes in the wall where you have marked these positions.
6. Fix the hanging plate onto the pipe B using the supplied screws.
7. Insert the supplied four wall plugs in the holes.
8. Fix the pipes A and B on the wall by fixing the hanging plates on the holes J, K, H
and I with the supplied screws.
Advertenties
Hoofdstukken
Inhoudsopgave
