Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event of a
guarantee claim.
S
3.5
etup location requirements:
I
n order to ensure the safe and trouble-free operation of the device, the setup location must
fulfill the following prerequisites:
T
he device must be set up on a firm, flat, horizontal surface with sufficient load-bearing
capacity.
C
hoose the setup location in such a way that children cannot reach the device.
T
he device is not intended to be installed in a wall or a built-in cupboard.
D
o not set up the device in a hot, wet or extremely damp environment or near
flammable material.
T
he electrical socket must be easily accessible so that the power lead can be
disconnected easily, in the case of an emergency.
T
he installation and assembly of this device in non-stationary setup locations (e.g. on ships)
must be carried out by specialist companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.
E
3.6
lectrical connection
I
n order to ensure the safe and trouble-free operation of the device, the following instructions
m
ust be observed for the electrical connection:
B
efore connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network.
no damages occur in the device
T
he electrical outlet must be protected by a 16
T
he connection between the device and the electrical network may employ a 3 meter long
(max.) extension cable with a cross-section of 1.5 mm².
prohibited because of the danger of fire that is involved with this.
M
ake sure that the power cable is undamaged and has not been installed under the
ice maker or over hot or sharp surfaces.
T
he electrical safety of the device is only guaranteed if the device is connected to a properly
installed protective conductor system.
protective conductor are prohibited.
by a qualified electrician.
are caused by a missing or damaged protective conductor.
4 Function
In this chapter, you'll find important information on the function of the device.
I
f in doubt, ask your qualified electrician.
A
O
perations using an electrical outlet without a
I
f in doubt, have the house installation checked over
T
he manufacturer cannot be made responsible for damages that
T
his data must agree in order that
safety cut-out switch.
T
he use of multiple plugs or gangs is
30
Advertenties
Inhoudsopgave
