Cleaning
GB
IE
Safety guidelines
Cleaning the appliance
16
All manuals and user guides at all-guides.com
WARNING! DANGER TO LIFE DUE TO ELECTRIC SHOCK!
Risk of injury when cleaning the appliance!
To avoid risks, observe the following safety instructions:
►
Before cleaning the appliance, disconnect the plug from the mains power
socket!
►
If necessary, allow the appliance to cool down before cleaning it.
►
Never immerse the appliance in water to clean it.
CAUTION
Damage to the appliance!
►
To avoid irreparable damage to the appliance, ensure that no moisture
gets into it during cleaning.
►
Do not use aggressive scouring cleaners or solvents, or a wire brush or
other abrasive objects, to clean the surfaces.
■
Clean the surfaces of the iron
cloth only.
■
Remove the water tank
■
Unscrew the Calc / Lock / Safe screw cap
thread in the boiler.
NOTE
The Calc / Lock / Safe screw cap
appliance has cooled down.
■
Empty the remaining water out of the boiler into a sink.
■
Pour around 150 ml of vinegar (approx. 5–6% acidity) into the boiler.
■
Screw the Calc / Lock / Safe screw cap
the boiler.
■
Swirl the liquid in the base station
down the appliance on a level fl at surface.
■
After about 15 to 30 minutes, unscrew the Calc / Lock / Safe screw cap
again and tip the vinegar into a sink.
and the base station
and empty it.
anticlockwise out of the
can only be unscrewed once the
anticlockwise into the thread in
around a couple of times and then set
with a soft, damp
SDBS 2200 A1